1/ Chọn mặt phẳng Right Plane. Vẽ biên dạng như hình
2/ Dùng lệnh Extruded Boss/Base (hay Insert > Boss/Base > Extrude) tạo bề dày 38.1mm
3/ Chọn mặt phẳng như hình
4/ Tạo sketch và vẽ biên dạng:
5/ Dùng lệnh Extruded Cut (hay Insert > Cut > Extrude), cắt sâu 12.7mm:
6/ Chọn mặt phẳng như hình
7/ Tạo sketch và vẽ biên dạng:
8/ Dùng lệnh Extruded Cut (hay Insert > Cut > Extrude), cắt sâu 12.7mm:
9/ Ta được:
10/ Chọn vật liệu. Kích chuột phải vào Material, chọn Edit Material:
11/ Xuất hiện hộp thoại và chọn vật liệu gỗ Balsa như hình:
12/ Ta được:
13/ Khai báo thông tin cho bảng list vật tư. Kích File / Properties
14/ Xuất hiện hộp thoại và khai thông tin
Zalo liên hệ: 0907636606